凤凰福彩|app下载

        
        

                                European EN Standard Grade Summary

                                Introduction

                                There are now a large number of EN standards for stainless steel products. It is not always easy to know which grades belong to which standard. You can of course look through the summary of each one on this website. However, this can be quite time consuming. This article is designed to provide a quick guide to check which standard a particular grade appears in.

                                Standards Covered

                                Whilst not an exhaustive list, the most common EN standards and a few which are quite specialised are covered.

                                To go immediately to the Summary click here. This opens up a spreadsheet. The spreadsheet allows you to sort the list of grades in numerical order or by type. If you use this facility you will get a Security warning about Macros. Choose the option Enable Macros. The spreadsheet also contains cross references between the EN numbering system and the AISI system or generic/brand names.

                                To access a more complete summary of grades and properties click on the appropriate link below:

                                Standard Description Links
                                EN 10088-2 Flat Products

                                Compositions

                                Mechanical Properties Austenitic

                                Mechanical Properties Ferritic

                                Mechanical Properties Martensitic

                                Mechanical Properties Duplex

                                Mechanical Properties Precipitation Hardening

                                EN 10088-3 Long Products Compositions

                                Mechanical Properties Austenitic

                                Mechanical Properties Ferritic

                                Mechanical Properties Martensitic and PH

                                Mechanical Properties Duplex 
                                EN 10028-7 Flat Products for Pressure Purposes Elevated Temperature Properties
                                EN 10272 Long Products for Pressure Purposes Elevated Temperature and Sub zero Properties
                                EN 10095 Heat Resisting

                                Compositions

                                Mechanical Properties

                                EN 10302 Creep Resisting

                                Compositions

                                Mechanical Properties

                                EN 10296-2 Welded Tubes

                                Compositions

                                Mechanical Properties

                                EN 10297-2 Seamless Tubes

                                Compositions

                                Mechanical Properties

                                EN 10217-7 Welded Tubes for Pressure Purposes

                                Compositions

                                Mechanical Properties

                                EN 10216-5 Seamless Tube for Pressure Purposes Compositions
                                EN 10253-3 Butt-weld pipe fittings without specific inspection requirements

                                Compositions

                                Mechanical Properties

                                EN 10253-4 Butt-weld pipe fittings with specific inspection requirements

                                Compositions

                                Mechanical Properties

                                EN 10312 Welded Tubes for Water  
                                EN 10151 Strip for Springs Compositions and Properties
                                EN 10270-3 Wire for Springs Compositions and Properties
                                EN 10269 High and Low Temperature Fasteners

                                Compositions

                                Mechanical Properties

                                EN 10264-4 Wire for Rope  
                                EN 10263-5 Long Products for Cold Extrusion  
                                EN 10222-5 Forgings for Pressure Purposes  
                                EN 10250-4 Open Die Forgings  
                                EN 10283 Castings Compositions

                                top

                                Office and Postal Address: BSSA, HQ, Blades Enterprise Centre, John Street, Sheffield S2 4SW

                                Registered Office: Pegasus House, 463A Glossop Road, Sheffield S10 2QD

                                Tel: +44 (0)114 292 2636    |     Email: admin@bssa.org.uk

                                Copyright © 2018 British Stainless Steel Association

                                web design sheffield by Llama Digital

                                      
                                      

                                                              culture

                                                              Second-hand housing

                                                              car

                                                              Finance

                                                              constellation

                                                              Second-hand housing

                                                              explore

                                                              news

                                                              Second-hand housing